The kits allow to run a system with one single 3D magnetic field source (connected to power supply) and three individual battery-powered wireless sensors. Each sensor has a 3D magnetic field receiver and a high frequency link to the USB receiver hub. The receiver hub translates the position and orientation data from each sensor to the laptop software.
All calculations are being made in the stand-alone wireless sensors. Laptop software only shows 3D information on screen, not being involved in the 3D calculation algorithms.
Tx/Rx VR Sensors
Develop VR controllers that you never thought possible until now
These products range from ultra-small components (3DC06 / 3DC09) to completely encapsulated robust components (3DC12EM / 3DC Cap Adaptor).
No line of sight needed. LF Magnetic Fields can reach sensors through solid objects.
Operate at lower power levels and offers the best signal-to-noise ratios.
No fixed referenced emitter or multiple fixed calibration elements.
Multiple tracking systems can be used in the same environment.
Longer range tracking than competing technologies.
Entirely customizable for the needs of your product.
Cubic design is the most effective approach to an isotropic magnetic coil emitter or receiver. There are four different cubic formats available, depending on core size.
• 2 pc 3DCC08 – 3DCoilCube VR Rx antenna 8x8mm
• 2 pc 3DCC10 – 3DCoilCube VR Rx antenna 10x10mm
• 2 pc 3DCC20 – 3DCoilCube VR Tx antenna 20x20mm
• 2 pc 3DCC28 – 3DCoilCube VR Tx antenna 28x28mm
Electromagnetic motion tracking systems work by using a low frequency isotropic magnetic field generator (3D emitter) and one or several isotropic 3D magnetic sensors. Emitter and receiver sides need special 3D magnetic coils to generate and receive the magnetic field signals. The low profile 3DCoil design achieves electromagnetic sensitivity isotropy by clever design techniques and fine-tuned windings calculations. By using these, the sensor volume required shrinks to SMT PCB mounted components standards (<3.5mm height).
• 2 pc 3DV09 – 3D VR Rx sensor 9.5×9.5×3.1 mm
• 2 pc 3DV11AOI – 3D VR Rx sensor 13×11.6×3.45 mm
• 2 pc 3DV15 – 3D VR Rx sensor 17×15.3×3.8 mm